Who can help me,
>I have to use pin 2 and 3 of the CAT plug but I am not sure to what I have to
>connect them.
>My interface is universal and I have a Txd/Rxd + and Txd/Rxd - available so
>it should be working with almost all radio types. However, what should I
>use for the FT-990? Next question is, Txd to pin 2 and Rxd to pin 3 or the
>other way around?
>Once this is connected correctly, how can I check if it works, in case I do
>not see any interaction between the radio and DX4WIN. I have checked my
>interface according to the instruction from the person who has build it.
Please contact me directly at gam@wxs.nl
Gerben A.Menting
PA0GAM
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|