I would like to improve and tailor as much as possible the TX
audio quality on my FT-1000MP. I have a Heil broad cartridge HC-5,
a Yaesu desktop MD-100A8X mic and a classic Shure 444 mic. The
audio tailoring tests are very laborious and time consuming; sometimes
the monitor it's not enough and it's quite difficult to find a qualified
partner
with patience and enough knowledge to help you in on-air audio tests.
Due to large number of settings combinations, I can't say I've found yet
a
real satisfying set of settings. Despite the MP audio tailoring
possibilities,
I still have a better, cleaner and more equilibrated modulation with my
3 yrs old FT-1000D ( with same microphones ).
If you own a FT-1000MP, I would like to know what are your personalized
TX EDSP settings :
* Menu 4-4 : TX audio EDSP equalizer ( off/1/2/3/4 )
* Menu 5-9 : TX EDSP BPF filter ( 6KHz / 2KHz )
* Menu 7-7 : EDSP modulation SSB TX BPF ( 100-3100 / 150-3100 /
200- 3100 / 300-3100Hz / off ). By the way what's the audio response
on Off position ?
* Please specify what microphone are you using.
* If it's a Yaesu desktop MD-100A8X, what are the low cut and high cut
settings on microphone stand switches ?
* What is your TX LSB/USB carrier offset setting ?
* What is your processor LSB/USB offset setting ?
* Very subjective question: how your parteners are usually
caracterizing
your audio quality: OK/ very good/ outstanding ?
Thank you in advance for taking time to check your settings and answer
to my questions.
73 de Morel, 4X1AD
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|