Thanks to all who replied...
>From my post on a problem with using the FT990 and an AL1200 on CW, I have
gotten several fixes that involve either speeding up the AL1200's relay
response, or slowing down the FT990 using RC circuits.
I was told that the FT1000 has a software control that allows you to slightly
delay the beginning of the CW after the transmit relay has closed. Is this
available on the FT990? I know that there is a transmit inhibit output on the
"band" plug, so perhaps this is a software option??
73,
Will
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|