AHHH!!! That's what I had forgotten! I just checked and that radio is in
MTUNE mode not VFO mode.
I just fired it up with my other computer and it's working fine now!
Thanks a bunch! 73, Ty K3MM
-----Original Message-----
From: Edward Hancock <hancock@ce.net>
To: Tyler Stewart <k3mm@erols.com>
To: <yaesu@contesting.com>
Date: Thursday, November 27, 1997 14:09
Subject: Re: [ct-user] FT1000MP interface problem (again!)
>Tyler Stewart wrote:
>>
>> Nope, it's the radio. NA and DX4WIN both work fine and both computers
>> talk to my other one in CT and not this one I'm having trouble with...
>>
>> I've seen this problem before...I think the radio is receiving commands OK,
>> but not sending to CT. When you try to toggle the band from CT, the radio
>> will hop around, but then CT quickly returns to the old band, leaving the
>> radio where it was.
>>
>> -----Original Message-----
>> From: Gary Yantis <gyantis@midtec.com>
>> To: 'Tyler Stewart' <k3mm@erols.com>
To: <yaesu@contesting.com>
>> Date: Wednesday, November 26, 1997 19:34
>> Subject: RE: [ct-user] FT1000MP interface problem (again!)
>>
>> >Do you have any other software (like a logging program)?
>> >If it has also stopped working with it you probably need to do a master
CPU
>> >reset on the FT1000MP. You'll lose all your settings so be sure to record
>> >what you have before you do the reset.
>> >
>> >73
>> >Gary, W0TM
>> >
>> >-----Original Message-----
>> >From: Tyler Stewart [SMTP:k3mm@erols.com]
>> >Sent: Wednesday, November 26, 1997 10:41 AM
>> >To: ct-user@contesting.com
>> >Subject: [ct-user] FT1000MP interface problem (again!)
>> >
>> >Well, mysteriously, my older MP has decided to stop talking to CT. It has
>> >worked fine in the past, but for some reason no longer...
>> >
>> >I know several of you have had this problem, so please email me with the
>> >cure(s).
>> >
>> >73 Ty K3MM
>> >
>> >--
>> >Submissions: ct-user@contesting.com
>> >Administrative requests: ct-user-REQUEST@contesting.com
>> >WWW: http://www.contesting.com/ct/
>> >Questions: owner-ct-user@contesting.com
>> >
>> >
>>
>> --
>> Submissions: ct-user@contesting.com
>> Administrative requests: ct-user-REQUEST@contesting.com
>> WWW: http://www.contesting.com/ct/
>> Questions: owner-ct-user@contesting.comWhile I haven't been
following your thread very closely I do remember a
>recent simular discussion on this issue the MP not communicating with
>the Computer through CT. This was about the time of CQWW Phone and
>concluded that if CLEAR is active on the MP or if the MP is for any
>reason not in VFO mode w/o mods like clear then CT amd the MP faile to
>talk correctly. This happened to the radio at W3PP's station and when
>we cleared CLEAR the problem went away and both the CT and MP worked
>together. The station is a MULTI - MULTI station running 4 radios, 4
>computers all interfaced and did o'k in its first test.
>Sorry if you went through this already.
>Ed
>
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|