Dennis,
I don't recall anyone replying to your request for the all-band transmit
mod for the FT900. So here it is:
1. Turn the radio off and remove the top cover.
2. On the top, inside front, find control board #1.
3. Locate pins 3001 and 3002 and jumper them.
4. Simultaneously depress PROC + ATT + IPO + NB.
5. Turn the radio on.
6. Look at the display and turn main tuning knob until it reads ON.
7. Depress PROC and release.
8. Remove the jumpers from 3001-3002.
9. Test for transmit capability and replace top cover.
Good luck.
Larry N0XB
Northfield, MN
At 10:41 AM 9/25/97 +1100, Dennis Edey wrote:
>G'day fellas,can anyone out there enlighten me in rgds to the ALL band TX
>mod for the ft900??
>tnxs in advance
>de dennis
>D.A.EDEY (VK4SX)
>9 JAMIESON.STREET.
>BUNDABERG.4670
>QUEENSLAND.
>AUSTRALIA.
>
>Email; dennis.edey@b130.aone.net.au
>Also use ICQ
>
>
>
>--
>FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
>Submissions: yaesu@contesting.com
>Administrative requests: yaesu-REQUEST@contesting.com
>Problems: owner-yaesu@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|