In message <9706221044.AA03810@thor.pla-net.net>, Bob Scott
<bscott@thor.pla-net.net> writes
>
>> I saw that the new YAESU desktop microphone model
>> MD100A8X coming with FT-1000MP should be modified
>> to work with FT-1000D. As far I know, the mic connector
>> pins are similar to both rigs so, why I should modify him ?
>>
>> 73 de Morel, 4X1AD
>
>Because (Someone correct me if I'm wrong) on the FT-1000MP and the
>FT-920, which is what the MD100A8X is designed to work with, pin 2 is
>
>for +5 volts. On the FT-1000D, FT-990, FT-890, FT-840, etc., pin 2 is
>
>a ground.
>
>Also, just the opposite has to be done to use a MD-1 on a 1000MP or
>920.
>Pin 2 must be opened on the MD-1 and regrounded elsewhere.
Rewire the MD-1 for an FT1000MP..... I don't think so. I haven't
rewired my MD-1 and can switch it between my FT1000MP and FT990 without
any problems. However, the UP/DOWN buttons on the MD-1 don't work with
the FT1000MP. Mmmmmm....
Vy 73,
Andrew Williamson GI0NWG / AC6WI
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|