My Kenwood TS-450S display is slow in "booting-up"
if the 450S has not been used in a while....Comes
right on in every-day use.
John W0DC
----------
> From: dave.sharred@sagem.co.uk
> To: yaesu@contesting.com
> Subject: [Yaesu] FT-1000MP display "delay" at power on
To: <yaesu@contesting.com>
> Date: Thursday, May 01, 1997 4:25 AM
>
> I also have seen this happen; there seems no logic / reason as to why.
> The radio bursts into life ok, but the display is dead ! It seems
> disconcerting, but just when you think you've got a prob, it then lights
up
> correctly.
>
> I don't see it as a problem (yet); I think (hope) that, maybe under some
> conditions, it is just the micro that services the display driver, being
a little
> slow to respond - maybe it is held in reset for too long, or updating
some
> EEPROM, or whatever
>
> Dave G3NKC
>
> --
> FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
|