I have a DSP-2232 interfaced to an FT-1000. The system works fine but you
may have to adjust the FT-1000 internal level controls if your driving the
DSP-2232 with AFSK. I believe mine had to be set all the way up. The
DSP-2232 and FT-1000 is a great data radio combination. -- John Lane, W8KX
----------
> From: David <dlcole@ibm.net>
> To: yaesu@contesting.com
> Subject: [Yaesu] FT1000 & DSP2232
To: <yaesu@contesting.com>
> Date: Monday, March 31, 1997 3:23 PM
>
> Anyone have any luck getting the FT1000D to work with an AEA DSP2232
> TNC? I get receive audio and PTT on both RTTY and Packet. I don't
> get a shift tone on RTTY nor do I get AMTOR/PACTOR tones on Packet.
>
> Maybe I should give up on the back input and wire an 8 pin mic connector
> and headphone jack like I did on my ond TS830s. That radio worked
> great on RTTY and other digital modes.
>
> Advise..
> David
> WD5BZY
> dlcole@ibm.net
>
> --
> FAQ on WWW: http://www.primenet.com/~ke7gh/yaesu.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
--
FAQ on WWW: http://www.primenet.com/~ke7gh/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
|