Any one been able to get the FH-1 to send serial numbers in the contest
mode. The instructions in the manual are not very good and the sheet
shipped with the FH-1 is equally bad.
Says to key in 4 question marks where you want the serial number in the
CQ (button 1). Anyway I tried lots of combinations no go. I have all
of the menu functions turned on in the MP per the instructions (as best
as I can tell anyway)
Comments welcome (and needed)
-Nate
N7OS
> ----------
> From: Frank Davis[SMTP:fdavis@newcomm.net]
> Sent: Thursday, March 13, 1997 4:11 PM
> To: yaesu@contesting.com
> Subject: [Yaesu] Ft-1000MP
>
> CAn anyone provide info on the following:
>
> 1) What is menu item 1-7 "AUTOFAST" for?
>
> 2) Does anyone have the desriptive info on extended menu items 9-0 to
>
> 9-9?
>
> 3) On my previous rig TS850S it was stated in the manual to keep the
> ALC
> deflection within the ALC bar range when opersting on CW and RTTY.
> On the FT1000MP there is no instruction regarding this....and on my
> unit
> when the RF PWR control is at maximum the ALC deflection is 2 or 3
> "blocks" beyond the end of the ALC bar range. Does this matter or not?
>
> I've been using the rig for about 10days on CW and RTYY and am very
> pleased with it. The EDSP is awesome on CW!!
>
> Frank VO1HP
>
> --
> FAQ on WWW: http://www.primenet.com/~ke7gh/yaesu.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
> Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA
>
--
FAQ on WWW: http://www.primenet.com/~ke7gh/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA
|