Please Reply To: arto.liimatta@ntc.nokia.com
To: <yaesu@contesting.com>
>Date: Wed, 29 Jan 1997 17:41:37 +0200
>From: Arto Liimatta <arto.liimatta@ntc.nokia.com>
>Reply-To: arto.liimatta@ntc.nokia.com
>Organization: CSC
>To: km9p@contesting.com
>Subject: Questions
>X-Status:
>
>Greetings from OH-land
>
>I did not find any other way how to send the message to refelection, so
>I am sending them here. Maybe you can put them to the table ?
>
>
>Arto OH2BUQ
>
>**********
>
>I read through most of the FT-1000MP messages from the reflector, but
>I didi not find any dgood answers for the small problems that I do have
>with FT-1000MP.
>
>1) I have HEIL PROSET headset, my problem is not the weak TX level, but
>too loud level. Reducing the MIC gain improves the problem, but it has
>to be reduced so much, that the actual signal suffers. The problem is
>worse with RF prosessor on. During the breaks or silent moment in the
>speech the The ALC seems to pump up the background noise very much
>(background fans etc). Any comments, I think that the HEIL (4) mic
>capsule should be much more directive.
>
>2) I haven't got my Turbolog logging program and FT-1000MP CAT to work
>properly. The FT-1000MP follows the command from the turbolog ok, but
>the
>responces (e.g. the frequency from the radio) is decoded incorrectly by
>the Turbolog. The Turbolog however worked just fine with my previous FT-
>990 (with the level converter, which I constructed myself). The first
>thing that came into my mind was, that it the responce message structure
>in Ft-1000MP is different than in FT-990 (In Turbolog version 2.0 I have
>FT-1000D and FT-990 on the list). Any comments.
>
>Arto
>I have a FT-1000MP
>
>
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & N4VJ / K4AAA
|