I can´t perceive overmodulation using DVS-2 with FT 1000MP.
73 and Happy Holidays!!
* * * * * P Y 2 N Y * * * * *
------ Vitor Luis Aidar dos Santos -------
E-mail: py2ny@supernet.com.br
ax.25: py2ny@py2ze.sp.bra.soam
Mail: p. o. box 190 - Campinas (SP)
Zip: 13001-970 B R A S I L
++++ Also PW2N, in contests ++++
> Have DVS-2 and FT1000D. Everything works fine except the DVS-2 output is
> super hot and over modulates the rig. (I guess the other possibility is
that
> the output itself is distorted.) Mic gain setting has no effect until it
is
> so low I have essentially no audio out when using the mic (like 8 o'clock
> position or so). Anyone know of what I can check or what can be
adjusted?
> Have opened up the DVS-2, and no pots that I can see. Nor do I see a
pot in
> the circuit within the 1000. Any help is appreciated.
>
> Steve, N3SL
> by: Akorn Access, Inc & KM9P
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|