Phil; you didn't mention how old your FT-900 is. If it's been around
for a couple of years, the master oscillator may need recalibrated.
I've never been able to find a way to 'offset' the display to
compensate for oscillator drift. Some Icom radios will let you do
that. Let us know what you come up with & good luck.
Dave WA0ZZG
AR
> From: "Phil Sikes" <psikes@whidbey.net>
> To: yaesu@akorn.net
To: <yaesu@contesting.com>
> Date: Fri, 29 Nov 1996 10:41:12 -8
> Subject: [Yaesu] FT900 Frequency readout
> Priority: normal
> Hello to the group. My FT900 frequency readout is consistently 150 Hz
> on the high side. I have tried doing a reset on the rig and that did
> not help. Is there a button combination that I might have pushed
> inadvertently? Am I going to need a complete alignment? Any help will
> be appreciated.
>
> 73 - Phil
> Phil Sikes - KJ7NS
> ARCI #9196 - QRP-L #528
> FISTS #2602 - NW QRP #412
>
> --
> FAQ on WWW: http://www.contesting.com/yaesufaq.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: ke7gh@contesting.com
> Sponsored by: Akorn Access, Inc & KM9P
>
>
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|