Robert Wanderer wrote:
>
> What position is the FRONT END control? You may have an overload
> condition if you're using NOR. What happens when you switch to IPO
> or the 6 or 12 dB ATTEN posiitions?
>
> I've a fairly older model and I don't see the problem as far as I can tell.
>
> 73,
> Bob AA0CY
>
> --
> FAQ on WWW: http://www.contesting.com/yaesufaq.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: ke7gh@contesting.com
> Sponsored by: Akorn Access, Inc & KM9PAlthough I do not own the
> 1000, I have seen what I at 1st thought was
intermod in the FT650 and later in the FT736R. In both instances it
turned out to be the noise blanker being gated by signals in its wide
passband. Turning it off 'cleared' the band. Unfortunately, on 6M it is
needed full time.
Dale W4OP
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|