> Which do I use? I believe the FSK output to pin 1 of the 4-pin DIN plug
> used for RTTY. Am I correct? (I assume AFSK would go to the mic.)
>
I hooked my PK232 afsk this weekend to pass out a few Q's.
into the packet pin connector on back. You just have
to remember that connector works in the PKT mode.
If you try RTTY button the rig expects FSK signal on the RTTY connector.
I expect the freq readout on the 1000 is different?
--
73 Robert WB5CRG w5robert@blkbox.com
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|