I recently aquired a FT-102. It has a receive problem. After turning it on,
it works fine for about 5 minutes, both on receive and transmit; but after
about 5 minutes, the receive audio deminishes until it nearly disappears
upon which I turn up the AF knob and the audio comes back but now the the
audio is garbled. When I shut off the radio for about a 1/2 hour , and
then start it up again everything is fine but, again, for about 5 minutes
and then the same problem recurs. It seems there may be a thermal problem.
Anybody out there that had this same problem; if so whats the cure??? Input
would be greatly appreciated.
Tnx/Bob
VE3VJX
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|