Hmm.
Has the TX audio been there previously with WL 12.85 & DR 2.2.2.11?
What channel is the WL Entry Window set to, L or R?
73,
Ed W0YK
From: w4ox@bellsouth.net <w4ox@bellsouth.net>
Sent: Friday, 29 November, 2024 09:06
To: 'Ed W0YK' <ed@w0yk.com>
Subject: RE: [WriteLog] Stumped with DigiRite
Ed, thanks, but the choices were correct in mixer.
Doug
From: Ed W0YK <ed@w0yk.com <mailto:ed@w0yk.com> >
Sent: Friday, November 29, 2024 11:02 AM
To: w4ox@bellsouth.net <mailto:w4ox@bellsouth.net>
Subject: RE: [WriteLog] Stumped with DigiRite
Go into WL Soundcard Mixer and select the RX and TX soundcard choices. For
some reason they get deleted for me every so often. I haven't figured out what
triggers that.
73,
Ed W0YK
-------- Original message --------
From: w4ox@bellsouth.net <mailto:w4ox@bellsouth.net>
Date: 11/29/24 07:52 (GMT-08:00)
To: 'Ed W0YK' <ed@w0yk.com <mailto:ed@w0yk.com> >
Subject: RE: [WriteLog] Stumped with DigiRite
Thanks, Ed, for the quick reply.
WL 12.85D / DigiRite 2.2.11.0
For lack of a better description, my rig keys but there is no modulation.
Doug
From: Ed W0YK <ed@w0yk.com <mailto:ed@w0yk.com> >
Sent: Friday, November 29, 2024 10:08 AM
To: w4ox@bellsouth.net <mailto:w4ox@bellsouth.net> ; WriteLog@contesting.com
<mailto:WriteLog@contesting.com>
Subject: RE: [WriteLog] Stumped with DigiRite
Hi Doug.
What versions of WriteLog and DigiRite are you referring to, and what is the
problem(s)?
73,
Ed W0YK
-------- Original message --------
From: w4ox@bellsouth.net <mailto:w4ox@bellsouth.net>
Date: 11/29/24 07:03 (GMT-08:00)
To: WriteLog@contesting.com <mailto:WriteLog@contesting.com>
Subject: [WriteLog] Stumped with DigiRite
All,
We have all read similar emails, it was working before, but now.
I am trying to set up for the FT Challenge, and previously had no issue
using WL & DigiRite for FT8, but for the life of me do not know why DigiRite
won't work now.
It is likely some setting I am overlooking as WSJT-X works without issue.
I am running a 7610, and a MicroHam MK3 with the router software.
The rig will key, but there is no signal output. In other words, the PTT
puts the 7610 into transmit, but my LP-100A only reads 0.4W.
Thoughts?
TIA, Doug W4OX
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com <mailto:WriteLog@contesting.com>
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|