I see something similar here if I try to do CW when I have the Digirite or the
MMTTY (RTTY) windows enabled. If those windows are on, then CW messages do not
send. It acts like the messages keys are being routed to those apps. Turn
them off and things work fine.
I am not familiar with CW-Rttywrite, but maybe related problem.
Randy
-----Original Message-----
From: Jon Suehiro <nn5t@attglobal.net>
Sent: Saturday, June 27, 2020 4:48 PM
To: 'Randy Thompson' <k5zd@outlook.com>; 'Lex Felker' <lfelker@gmail.com>;
'WriteLog Reflector' <writelog@contesting.com>
Subject: RE: [WriteLog] F Keys not working for FD
Randy, I am in the same condition. WL 12.50H
If I go back to 2020 WPX CW file on WL, then CW keying works with CW-Rttyrite.
(Ports setting was saved in configuration.)
I started the new WPX, browse 2020 WPX CW message with CW-Rttyrite, no problem.
I recall 2020 ARRL June VHF Contest with CW-Rttyrite, CW won't key TS-890.
I am so sure this was working last month.
If I kills the CW-Rittyrite screen but no port change at all, WL keys K1EL
Winkey (microHAM DKII) no problem.
With CW Display (without Rittyrite), no problem on CW keying.
I open the new Field Day, recall the CW exact message from 2020 WPX CW ---
If no other window, CW keying no problem.
With CW Display, CW keying no problem.
With CW-Rittyrite, no CW keying.
I guess I am lazy so I can use the DUPE check by CW-Rittyrite instead of typing
the calls and was working till last VHF Contest. Now not working on VHF
Contest (and FD).
I don't know if Windows last major update with new Microsoft Edge really messed
up a part of WL with Rittyrite function or not.
Jon NN5T
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Randy
Thompson
Sent: June 27, 2020 19:49
To: Lex Felker; WriteLog Reflector
Subject: Re: [WriteLog] F Keys not working for FD
Set the macros using Setup - Document Settings - CW/RTTY/SSB messages...
Check your port settings that you are set up to send CW. Setup - WriteLog
Options - Ports...
Randy K5ZD
-----Original Message-----
From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Lex Felker
Sent: Saturday, June 27, 2020 2:58 PM
To: WriteLog Reflector <writelog@contesting.com>
Subject: [WriteLog] F Keys not working for FD
I'm trying to operate FD on cw, but the F Key macros are not working. If I open
any other log used recently, the macros work fine. I know it must be an
operator error, but I can't seem to find where the set up for FD is any
different from the other logs that are working. Rig freq is showing correctly,
etc.
I'm playing manually now, but that gets old quick
Thanks
Lex N4LF
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|