Also think if you are planning to cover V/UHF with 2nd radio. Ports setting
could be tricky. I use TS-890 with microHAM DKII, that occupies all 4 ports
(Rig, CW, RTTY, PTT). Finally I configured with IC-9700 that I plan to use
on CW/SSB/FT8/(FM). The change is done manually, so not instant but I can
switch maybe in less than 30 seconds.
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Randy
Thompson
Sent: June 23, 2020 15:15
To: Jim Johnson; Writelog@contesting.com
Subject: Re: [WriteLog] FD 2020
Hard to say on #1.
As for #2, WL is great at moving between modes. To switch to RTTY just
right click in the logging window and select RTTY view. To switch to FT
modes, right click and select DigiRite view. (Both assume you have MMTTY
and DigiRite installed and configured.)
Randy K5ZD
-----Original Message-----
From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Jim Johnson
Sent: Tuesday, June 23, 2020 9:13 AM
To: Writelog@contesting.com
Subject: [WriteLog] FD 2020
A couple of questions:
1. Should we expect and increase in RTTY activity this year?
2. Will Writelog (WL) transition between CW or PH to DIGI and back and
forth without any problems?
Jim/KC4HW
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|