WriteLog
[Top] [All Lists]

Re: [WriteLog] K3 steady keying

To: writelog@contesting.com
Subject: Re: [WriteLog] K3 steady keying
From: William Liporace <wc2l@wc2l.com>
Date: Fri, 25 May 2018 16:49:44 -0400
List-post: <mailto:writelog@contesting.com>
Did not have it set for PC generates CW... Fresh look when I got a chance...

Will WC2L

On 5/25/2018 9:55 AM, Robert wrote:
In your K3
Check the PTT and CW settings on incoming serial port


-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of William
Liporace
Sent: Friday, May 25, 2018 3:57 AM
To: writelog@contesting.com
Subject: [WriteLog] K3 steady keying

I just started WriteLog. This is a new setup. Full paid version.
As soon as I enable the com port and hit apply, the radio goes into a steady
keying state. I know it is something simple.... The radio and WriteLog are
new to me...

FYI, N1MM works just fine.

TNX Will WC2L

--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node  telnet
dxc.wc2l.com or 144.93 MHz wc2l@wc2l.com

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/



--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
wc2l@wc2l.com

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>