Rich
The 6700 only does AFSK.
Steve AI9T
On 11/27/2017 10:04 PM, Richard Thorne wrote:
Steve,
I've been playing with my setup for quite a bit this evening. I can
receive fine I just can't transmit.
The rig is keying and the MTTY control panel show's a diddle, it's
just not making it to the transmitter.
I'll keep playing with it, once I get it figured out I'll let you know.
I'm curious, why are you running AFSK vs FSK?
Rich - N5ZC
On 11/27/2017 9:12 AM, Steve AI9T wrote:
Hi Rich
I have a couple questions for you regarding the Flex setup. I started
using N1MM a while ago but thought I'd give Writelog another try.
I was running V12 when I quit paying for updates but last week I
decided I would renew and Pay up.
I have it setup for SO2R RTTY. Using a 6700. I have it working OK but
have a couple issues. Running AFSK how do you increase the audio
output? I'm not driving it quite hard enough and without DAX I can't
figure out how to raise it.
Secondly, if I try to do TX lockout Last one wins it quits TXing and
I have to uncheck the lockout setting to get it to TX again.
Thanks
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
--
73
Steve AI9T
http://www.ai9t.com
AI9T DX Cluster
Version 4 AI9T Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|