> Receive message “comm port: com4 not available. Access denied.
Any time you perform an update, always *restart* Windows 10. If
you receive a "com# not available" message, *close* all programs
then perform a *restart* in Windows 8, 8.1, or 10.
Since Windows 8, Windows has saved an image of the kernel with all
drivers when shutting down. It reloads that image on boot-up to
speed up the boot process (if you are not using hibernate - which
is even faster since all applications are also saved and reloaded).
Unfortunately, if an application has hung the serial port *or* the
driver has changed a normal shutdown/reboot will not flush and
refresh the drivers. You can force Windows to reload the kernel on
every reboot - if you want to dig around in the Power options - by
turning off "hybrid sleep".
73,
... Joe, W4TV
On 3/25/2016 4:08 PM, David Earnest wrote:
A new problem after downloading Window 10 upgrade (windows 10 already
installed).
I use radio comport 4 on my DX4WIN logger, mmtty standalone, HRD
successfully.
With the above programs shut down, off, not being used or accessed……
I bring up Writelog V12.03 setup, ports, select port 4 for Kenwood radio,
9600 baud,
Comport 8 is Winkeyer 2.
Hit OK
Receive message “comm port: com4 not available. Access denied.
Com 8 Winkeyer works.
I uninstalled and reinstalled Writelog and am still getting same error.
What gives?
Thanks for any help or suggestions.
73, Dave, K7JJ
Dave Earnest
k7jj@arrl.net
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|