Gary:
Are you using a 3 contact (stereo) plug to the key jack? A 2 contact plug will
short things out and key the rig.
Also, if the FT-950 has a built in keyer is it turned off? If the built in
keyer is on, it can exhibit what you describe when you try to send with
Writelog.
Keith W3KB
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Gary
Sent: Friday, January 15, 2016 12:55 PM
To: writelog@contesting.com
Subject: [WriteLog] Yaesu FT-950 CW Keying
I also sent this question to the FT-950 Reflector but I have not found a
solution.
Is anyone in the group using Writelog with their FT-950. I have been unable to
get it to Send CW correctly. I have tried all settings in Writelog and also
the menu settings on the FT-950. It will only send a series of dits or key the
rig continuously.
l am using a simple home-brew, one-transistor interface, plugged into the Key
jack on the rear of the FT-950. It has worked perfectly with other radios
(IC-736, IC-746PRO, Kenwood TS-2000).
My interface works perfectly with other software including Ham Radio, Deluxe,
N1MM and AC Log by N3FJP.
I upgraded from Writelog V11 to V12 with the same results.
HP Duo Core E8400 Desktop
Windows 7.0 64-Bit
3Gb Memory
Using Com 1 (Serial Port, not USB).
Any suggestions will be appreciated.
Gary, wy0v
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|