Any one interested,
Wayne posted most of the solution (below) but I was missing one
important step.
My setup had two Rttyrite windows, one for each radio. I usually run
MMTTY and 2Tone with these windows. When I switched to the cw decoder
for the Rttyrite window, I was selecting "Sound Board AFSK" from the
TUType menu and then going to Mode=cw. This was giving me left channel
audio to both cw decoders.
The trick is to select the "Parent SO2R Sound Board AFSK" option instead
of the "Sound Board AFSK" option. Now the sound board is opened in
stereo and I get the two cw decoders responding to the left and the
right audio stream appropriately.
It does work.
Thanks Wayne
Now to try version 12 on my backup computer while I chase DX this next week.
Jerry
On 1/13/2016 12:09 AM, Wayne, W5XD wrote:
Writelog CWers,
Is there a way to get right channel audio to the cw decoder opened
from a rttyrite window via "sound board AFSK"? I am running Windows 7
64bit and Writelog 11.32 with two radios; one on the left and one on
the right. I am still using the old set up on one sound card for the
two radios (not the newer 2 sound cards). For rtty with mmtty I can
select left or right channels. But with the cw decoder all I seem to
get is left channel audio. this means that both radios see the same
audio stream instead of a left and right stereo stream. Does this mean
that Writelog is only opening the sound board in mono, not stereo as
in rtty mode?
Or am I just having a senior moment and overlooking something.
Jerry, W6IHG
The configuration you describe is supported.
Sounds like you already found step #1, which is to run the Start menu
program installed in WriteLog V11 (or V12 today) Sound board mixer control.
The critical entry for you case is "rec(s) to PC".
Step 2 is to have two Entry Windows, which you get with
Radio/number-of-radios (sounds like you have that one, too)
Step 3 is to set one of them to be "LEFT" and the other to "RIGHT" using
the menu: Radio/this-window-is
Step 4 is to turn on the CW display (use the Windows Menu) and then
right click and Setup CW decoder...and set it to STEREO.
Wayne
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
--
-----------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner/
jpixton@shentel.net
-----------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|