I would like to do a better job of interconnecting the many devices in my
shack. Why do you recommend such a heavy and stiff #10 wire? Is smaller
wire or 3/8 braid acceptable?
John KK9A
To: writelog@contesting.com, Reflector Elecraft <elecraft@mailman.qth.net>
Subject: Re: [WriteLog] Using K3 KIO3B USB with Writelog
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Fri, 25 Dec 2015 08:56:48 -0800
WRONG! The need for isolation transformers is a total fallacy. No
isolation transformers are needed with ANY radio if proper, simple
chassis-to-chassis bonding of all interconnected equipment is done in the
shack. It's easy and cheap -- all it takes is short lengths of plain,
ordinary copper wire.
Study http://k9yc.com/GroundingAndAudio.pdf
The tutorial is a bit long because I have to bust the "ground loop" myths.
73, Jim K9YC
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|