WriteLog
[Top] [All Lists]

Re: [WriteLog] Band maps not working

To: k5zd@charter.net
Subject: Re: [WriteLog] Band maps not working
From: Gordon Bousman <nw7d.ham@gmail.com>
Date: Fri, 13 Nov 2015 17:44:27 -0800
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Thanks Randy, the problem discovered was that somehow, "Log the frequency
of QSO's" got changed to Manual instead of the rigs on the 2 comm ports.
I don't remember ever changing it so something changed it, possibly a
Windows update, not certain.  Problem resolved, thank you.

Gordon NW7D

On Fri, Nov 13, 2015 at 1:41 PM, Randy Thompson K5ZD <k5zd@charter.net>
wrote:

> It sounds like WL is not talking to the radio.  If you don't have a
> frequency from the radio, the band map won't move.
>
> > -----Original Message-----
> > From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of
> > Gordon Bousman
> > Sent: Friday, November 13, 2015 8:17 PM
> > To: writelog@contesting.com
> > Subject: [WriteLog] Band maps not working
> >
> > I cannot get my Writelog Ver 11.30C bandmaps to work properly, have been
> > trying to troubleshoot this problem for weeks without success with my
> > SO2R setup interfaced via a microHAM MK2R+..  At program startup, both
> > bandmaps show 3500 kHz and will not follow my IC-7600 or Pro-3.  I can
> > transmit and decode RTTY just fine.  In the Window tab of Writelog, if I
> > click on Band Map Window (BTW this item is not checked although the
> > Bandmap windows are visible), nothing happens but if I close one or both
> > bandmap windows, they cannot be re-opened by clicking on the Band Map
> > Option.  Then the only way to get the bandmap windows displayed again is
> > to shut down Writelog and restart the application.  I know that my port
> > settings are correct in Setup; I've been using Writelog for years so am
> > very familiar with setting up Writelog ports.  However I cannot seem to
> > find a solution in spite of reinstalling the program several times.  BTW,
> > in DX Labs, I can see my transceiver frequency in Winwarbler and it
> > tracks the IC-7600 dial....this also via the microHAM MK2R+ interface so
> > I don't think there is anything wrong with the MK2R+.  Any advice would
> > be appreciated.
> >
> > Thanks,
> > Gordon NW7D
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>