Bruce,
Never thought about using the actual number keys on the external keypad as I
use those from time to time manually to enter a received serial number. I
find that easier to do on RTTY than trying to point and click on the
exchange with a mouse. Also, sometimes the serial number arrives in the
middle of a string of garbage that can't be clicked on with the mouse else
the trailing garbage characters end up in the NR field. Much easier for me
to type it in with the keypad rather that the row on numbers on the standard
keyboard.
73,
Gary AL9A
-----Original Message-----
From: Bruce King
Sent: September 06, 2015 8:52 AM
To: Writelog user group ; al9a@mtaonline.net
Subject: Re: [WriteLog] Spots on the band map
I use my numeric keypad for this as well with shortcut keys set up as
7 for go to next mult up band
1 for go to next mult down band
9 for go to next station up
3 for go to next station down
I found that I wasted a lot of hand movement time when doing click and
pounce so I also added shortcuts for
5 for send F4 (my call)
2 for send F2 (exchange)
73 Bruce W1CSM
Message: 3
Date: Sat, 5 Sep 2015 11:47:49 -0800
From: "Gary AL9A" <al9a@mtaonline.net>
To: <writelog@CONTESTING.COM>
Subject: Re: [WriteLog] Spots on the band map
Message-ID: <3F0F720479594590B054F03C27CA2857@AL9APC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
George,
Yes, there is a way to do this. You set up some keyboard shortcuts in
WL using readily available shortcut commands. Below are the four
shortcut keys I use.
[KeyboardShortcuts]
MULTIPLY=EntryGotoNextMultUpBandmap
Ext_DIVIDE=EntryGotoNextMultDownBandmap
SUBTRACT=EntryGotoNextStnUpBandmap
PAUSE=EntryGotoNextStnDownBandmap
My keyboard has an external numeric keypad so I use three keys from the
numeric keypad and one other unused key, the PAUSE/BREAK key. As
configured if I want to jump from mult to mult I hit the multiply key
"*" which jumps to the next mult UP in the bandmap. It ignores any good
calls in the band map as well as all dupes. To go the other direction I
hit the divide key "/" on the keypad and it jumps to the next mult DOWN
the band map. Note that this key is identified as Ext_DIVIDE, which is
separate from the normal "/" next to the SHIFT key on the keyboard.
This key is still needed for portable or mobile calls.
The other two shortcut keys also jump from call to call, either a good
call or a mult call. They too ignore dupes. As the shortcut key stops
on a call WL auto fills the CALL field in the Entry window. Jump to the
next call and the CALL field auto updates. If the spots are fairly
accurate, both in the call sign itself and in the spotted frequency you
can quickly cruise up and down the band map spots without ever touching
the mouse.
73,
Gary AL9A
-----Original Message-----
From: Georgek5kg--- via WriteLog
Sent: September 05, 2015 10:03 AM
To: writelog@CONTESTING.COM
Subject: [WriteLog] Spots on the band map
Is there a keyboard command that will scroll up and down the band map to
capture a spot and put it into the call entry field?
In other words, is there a way of getting a spot on the band map
without having to grab the mouse?
73,George
George Wagner, K5KG
Bruce A. King
Regis Consulting Partners LLC
111 Coventry Wood Road
Bolton, MA 01740
978 779-5035
mailto:bruce@regis-consulting.com <mailto:bruce@regis-consulting.com>
www.regis-consulting.com
We built it.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|