> On 25 Feb 2015, at 23:11, Dave Marshall via WriteLog
> <writelog@contesting.com> wrote:
>
> Does the latest version of WL do a clean install with Win 7?? I have V11.06
> with the upgrade to V11.12. This worked great with XP and I have used WL for
> several years, upgrading when appropriate. But since moving to Win 7 a couple
> of months ago I can't get it running.
> I use MMTTY, which works fine by its self, but WL only works receiving. I
> can copy fsk thru the MMTTY engine into WL and it will key the transmitter,
> but no data through the DTR line.
If you're getting PTT from WriteLog, but no data, I have had this problem in
the past. (Right now, I'm running WriteLog 11.23L, MMTTY and ExtFSK in Windows
7 Ultimate.) I'm using a RigBlaster Plus for RTTY, and when I've had this
symptom I've found that switching the position of the VOX/Auto switch on the
RigBlaster fixed it.
I see on the Advantage you don't have that same switch, but you might try
playing with the TX switch, switching between COM/Off/VOX and seeing if a
different selection may clear it up.
Hope this helps.
73,
John K8AJS
jebastin@fastmail.fm
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|