You will need to find a way - either through the mouse driver for your
keyboard/mouse or a key mapper - to map the Scroll Up and Scroll Down
events to keystrokes to activate the commands.
However, unlike Kenwood, Flex, & Elecraft, in which RD;/RU; with no
parameters moves the RIT one step (10 Hz), it looks like Yaesu needs
an offset which may make RIT "uncontrollable".
73,
... Joe, W4TV
On 2015-01-17 2:35 PM, Courtney Judd wrote:
Hi Joe, took your advice and looked in the FT2000 CAT operations manual
and sure enough I found that it is possible to control the RIT control
using CAT control:
RD=CLAR MINUS OFFSET
RU=CLAR PLUS OFFSET
RD is SET 1 2 3 4 5 6
R D P1 P1 P1 P1
where P1= 0000-9999 hz
RU is identical except 2 is U
Looks like that ability is there , but I have no idea on how to get
writelog to use this. Any ideas? I am using FT2000D, microKeyer2 to
computer with Writelog 11.19 and I want to map these commands to the
scroll wheel on the keyboard!
tnx Cort K4WI
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|