I tried sending this earlier, but the attachments exceed the file size
allowed by the reflector. Instead if you want either of the prefill files
they can be downloaded from Dropbox at the following links:
https://www.dropbox.com/s/7yqsz26bvb70onf/WL_CWT_Prefill%20for%20V1.0.adi?dl=0
https://www.dropbox.com/s/4x8z6mn6d9q18py/WL_CWT_Prefill%20for%20V1.1.adi?dl=0
73,
Gary AL9A
-----Original Message-----
From: Gary AL9A
Sent: January 15, 2015 11:47 AM
To: WriteLog Reflector
Subject: Re: [WriteLog] Looking for CWT pre-fill file
As Marsh has indicated there are two different CW OPS Mini CWT contest
modules available for WriteLog. There are some field name differences
between the two versions that make a single prefill file unusable by both
contest modules. The field name changes are minor, but the prefill file
field names must match exactly or it won't work.
Field Name Descriptions:
V1.0 - <APP_WRITELOG_FNAME:> and <APP_WRITELOG_RCVD:>
V1.1 - <APP_WRITELOG_NAME:> and <APP_WRITELOG_ID/SPC:>
Depending upon which Mini CWT module you are running a different prefill
file layout is needed. You can tell which one you have by looking closely
at the WriteLog contest module names when you click on "Start a new log...".
If the module name is "CW OPS Mini CWT", this is V1.0 which can be
downloaded at http://writelog.com/downloads/third-party. If the module name
is "CW OPS Mini-CWT by K0PC", this is V1.1 which can be downloaded at
http://www.cwops.org/software.html.
I have attached two different prefill files that are configured with the
correct field names for the two different module versions. This is the same
data that Marsh distributed earlier today. If you have V1.0 installed you
can either upgrade to V1.1 at the CW OPS web site or use the prefill file
for V1.0. The two programs appear to be very similar except for the field
name headers in the Entry window. The Contest/Parameter Setup... window in
V1.1 has been improved from the one in V1.0. There may be other minor
changes that I haven't discovered yet.
73,
Gary AL9A
-----Original Message-----
From: Marsh Stewart
Sent: January 15, 2015 8:41 AM
To: 'John Getz'
Cc: 'Gary Senesac'
Subject: RE: [WriteLog] Looking for CWT pre-fill file
The .adi file previously sent does NOT work with the CWT-mini contest module
included with WL.
But, it DOES work great with the
http://writelog.com/ThirdParty/Mini_CWT_1.0.msi
contest module available on the WL website under Downloads/ThirdParty.
73,
Marsh, KA5M
-----Original Message-----
From: Marsh Stewart [mailto:marsh@ka5m.net]
Sent: Thursday, January 15, 2015 11:15 AM
To: 'John Getz'
Cc: 'Gary Senesac'
Subject: RE: [WriteLog] Looking for CWT pre-fill file
This WL CWT prefill .adi file was created from the info on the CWT web site.
73,
Marsh, KA5M
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of John
Getz
Sent: Thursday, January 15, 2015 9:30 AM
To: writelog@contesting.com
Subject: [WriteLog] Looking for CWT pre-fill file
Does anyone have a .adi file for pre-fills in the Wednesday CWT contests?
TNX
John Getz
, AD8J_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|