Hi Paul,
I seem to remember having that same problem. I'm sure the gibberish is
related to the fact that the yellow line is not over the signal being
decoded. Here's how I corrected the problem. On the small window that shows
the incoming signal display there is a box showing the sidetone frequency.
You want it to agree with the sidetone you have selected for your rig. For
example, I use a K3 which has a selectable sidetone and mine is set to 420
Hz. When I changed the signal display window frequency to 420 the signal I
was listening to now falls directly over the yellow line.
WriteLog should then transfer this information to the ini file so that the
program will reopen with your preferred sidetone frequency. Here are the two
lines that seem to be affected in the ini file.
CW_RECV_FREQ=420
CW_XMIT_FREQ=420
I hope you don't mind my adding a related question to your thread. You may
have noticed the same problem. The CW-Rttyrite window that displays the
scrolling text allows the text to flow too far to the right before it rolls
over to a new line. It never fails that the text I want to read has been
hidden and there is no scroll bar on the bottom of the window to be able to
access it. It doesn't seem to be affected by spaces (or lack of spaces)
between characters. I've tried different widths of the window and the
problem seems unfixable. Any suggestions?
73,
Mike K2MK
***********************************************
From: Paul Kern via WriteLog <writelog@contesting.com>
Date: Sun, 11 Jan 2015 00:48:18 +0000 (UTC)
I finally figured out why I had no feed to the CW receiver Window - needed
to
go to the Sound Board setup but my CW Receiver window display does not look
like the one in the manual. I have two peaks on either side of the center
marker. Cannot get the peak to fall on the yellow line. Also it seems to
show
either no decoding or just gibberish of mostly "E's" and "I's". Any
thought's? I have also submitted this to WriteLog Support.
Paul NK4P
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|