On Thu, Dec 11, 2014 at 2:00 PM, Alan Maenchen <ad6e@arrl.net> wrote:
> I managed to setup the K3 DVK so it works with WL. It's actually working
> very well but has two problems:
>
> 1) For CW, F1-F4 also evoke the K3 memory, and I can't setup the CW
> memories (M1-4) in the K3 without causing gibberish. Can WL distinguish
> between CW and SSB such that the K3 memories are ONLY envoked for SSB?
>
> I can probably get around this by NOT using F1-F4 for CW but old habits die
> hard.
>
In the CW/RTTY/SSB Memories window, click the SSB radio button. When
defining the SSB message content, enter the command %GKx in the desired
function key to send Macrox to the radio with keyboard focus.
For example:
F1/F11: %GK10
F2: %GK11
F3: %GK12
F4: %GK13
(And remove your ini file keyboard shortcuts for RigKbdCommand)
>
> 2) Hitting ESC will NOT stop the K3 memory sending. If I hit the wrong key
> by mistake, I have to reach over and hit the K3 REC button .. awkward and
> usually too late. It isn't often that I make that mistake, but I do like to
> record a long CQ and use ESC to truncate at the proper time. However, ESC
> doesn't work when using the K3 DVK. Is there a way to either make ESC work
> with the K3 memory or some other keyboard key?
>
You might find it easier to just stomp on the footswitch, PTT or trip your
VOX. The K3 will stop playing the message.
Chad WE9V
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|