WriteLog
[Top] [All Lists]

[WriteLog] ARRL 10M Contest - Prefill Exchange File

To: "WriteLog Reflector" <writelog@contesting.com>
Subject: [WriteLog] ARRL 10M Contest - Prefill Exchange File
From: "Gary AL9A" <al9a@mtaonline.net>
Date: Wed, 10 Dec 2014 17:26:23 -0900
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
This one kind of snuck up on me and I was sleeping at the switch until this afternoon. I wasn't sure if I would be operating this year because of my recent "handicap" - not me, my station. Last week my ancient Create Design rotor gave up the ghost and is now off in rotor heaven. To keep my antennas from wind milling around I've strung up a line over the back end of the TH-11 and secured it so it won't rotate like a weather vane. Problem is it is fixed heading SE which may be ok for the NA folks, but really sucks for much DX. This will probably be my situation until next Spring. But, that's my problem, not yours. So....

For those interested in running the ARRL 10M contest this weekend I have updated my call history prefill file from last year's edition. The file currently contains 5,312 unique calls for US/VE/XE stations and their associated States/Provinces. There are no other DX calls in the file as DX stations will be sending a sequential serial number, which is impossible to predict.

If you are interested in using this prefill exchange file for the contest you can download it at the following link.

https://www.dropbox.com/s/ebfn9v3bljqkcmb/ARRL%2010M%20Contest%20History%20File.adi?dl=0

If you need assistance in setting up WriteLog to use a prefill exchange file instructions can be found at this link.

https://www.dropbox.com/s/mckz6zbuklff0up/WriteLog%20Prefill%20Exchange%20file%20loading%20instructions.pdf?dl=0

As always, remember the usual precaution. Be sure to verify the prefill file information with what you actually copy off the air!

BTW, I am now researching replacement rotors. My tower is a crank up so the Prosistel Big Boy series won't fit into the top tower section due to the drive housing protruding through the tower side. Current candidates are the Alpha-Spid RAK or the M2 Orion 2800 (although that one is pricey!). I have a Green Heron RT-21 controller box so would prefer a rotor compatible with that control box. Any other suggestions? Comments pro or con about the two models under consideration?

73,
Gary AL9A
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>
  • [WriteLog] ARRL 10M Contest - Prefill Exchange File, Gary AL9A <=