Joe,
I've been using AUTOBAUD for many years spanning several rigs and computers
(up to Win7) without a problem.
I know how the hardware is supposed to work since I've designed 232
hardware, but I don't do software so I'm a bit ignorant about how software
does that task. I can imagine how it should be done, and it should be
bullet proof so long as there aren't any glitches (like from RF).
Just curious about your hard opinion.
73, Alan AD6E
----------------------
Date: Thu, 09 Oct 2014 16:06:12 -0400
From: "Joe Subich, W4TV" <lists@subich.com>
To: writelog@contesting.com
Subject: Re: [WriteLog] New computer woes
Message-ID: <5436EAB4.3090602@subich.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Have you set up the CAT communications in microHAM Router
*BEFORE* starting WriteLog and then configured WriteLog to
communicate with MK II/the rig *at the same data rate* that
you configured in the rig and microHAM Router?
*DO NOT, EVER* use "autobaud" in any software or rig.
73,
... Joe, W4TV
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|