WriteLog
[Top] [All Lists]

Re: [WriteLog] Bandmap and Timed CQ issues

To: "k5zd@charter.net" <k5zd@charter.net>, "'Joe Subich, W4TV'" <lists@subich.com>, "writelog@contesting.com" <writelog@contesting.com>
Subject: Re: [WriteLog] Bandmap and Timed CQ issues
From: Don AA5AU <aa5au@bellsouth.net>
Reply-to: Don AA5AU <aa5au@bellsouth.net>
Date: Mon, 6 Oct 2014 13:41:02 -0700
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
For what's it's worth, I've not seen this running SO2R on two networked PC's - 
one radio per PC.

73, Don AA5AU


>________________________________
> From: Randy Thompson K5ZD <k5zd@charter.net>
>To: "'Joe Subich, W4TV'" <lists@subich.com>; writelog@contesting.com 
>Sent: Sunday, October 5, 2014 12:18 AM
>Subject: Re: [WriteLog] Bandmap and Timed CQ issues
> 
>
>I am using FSK keyed through two serial ports.  I am using the W5XD MK1100
>keyer for the audio switching.  PTT is set to none. Not sure how PTT is set
>by WL when using FSK.
>
>I am running 2Tone as the primary decoder. But, I have seen this same issue
>with both 2Tone and WL's Rttyrite.
>
>Randy
>
>> -----Original Message-----
>> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Joe
>> Subich, W4TV
>> Sent: Wednesday, October 01, 2014 1:38 AM
>> To: writelog@contesting.com
>> Subject: Re: [WriteLog] Bandmap and Timed CQ issues
>> 
>> 
>> It may be due to multiple sources of PTT ... what are you using for PTT,
>> what interface and what kind of SO2R switch (if any for RTTY)?
>> 
>> FSK or AFSK?
>> 
>> 73,
>> 
>>     ... Joe, W4TV
>> 
>> 
>> On 2014-09-30 9:29 PM, Randy Thompson K5ZD wrote:
>> > I have been seeing this for several years.  Probably saw it 3 dozen
>> > times this weekend.
>> >
>> > Happens when you switch between the two radios. I think it is just a
>> > bug from the software still thinking it is transmitting the buffer,
>> > even though the PTT has released and we are in receive.
>> >
>> > I sometimes hit the escape key to stop transmission and that gets it
>> > back in the receiving mode.  Of course, it also kills the transmit
>> > buffer I was sending for real.
>> >
>> > Randy, K5ZD
>> >
>> >> -----Original Message-----
>> >> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of
>> >> Dean St. Hill
>> >> Sent: Wednesday, October 01, 2014 1:08 AM
>> >> To: Michael Gulbranson
>> >> Cc: WriteLog Reflector
>> >> Subject: Re: [WriteLog] Bandmap and Timed CQ issues
>> >>
>> >> Had a similar issue this weekend during cqww. I am running so2r with
>> >> 2*ft950's - when I would interrupt a running message on say rig 1 -
>> >> by starting a message on rig 2; the message on rig 1 would continue
>> >> but the
>> >> rig1 would stop tx. So mmtty is "stuck" in transmit until the buffer
>> >> is finished and therefore misses the first part of the other
>> >> station's transmission on that frequency.
>> >>
>> >> I am 100% sure this was not happening before. I figure its some kind
>> >> of config issue but I follow the rttycontesting.com or uHam example
>> >> settings faithfully so I have no idea where to start.
>> >>
>> >> Maybe I never noticed before (in recent times) because I wasn't
>> >> really fully doing SO2R operations. This contest was the first real
>> >> SO2R in several years as I was rebuilding and it was easier to go
>> >> with single rig contesting with all the changes around me.
>> >>
>> >> Hope someone has a solution.
>> >>
>> >>
>> >> Regards
>> >>
>> >>
>> >> Dean - 8P6SH
>> >>
>> >>
>> >> On Sep 29, 2014 7:21 AM, "Michael Gulbranson via WriteLog" <
>> >> writelog@contesting.com> wrote:
>> >>
>> >>> Help
>> >>>
>> >>>
>> >>>
>> >>> I experienced an issue with timed CQ and trying to cancel using the
>> >>> ESC key.
>> >>> This is what happens.  I can cancel the CQ shortly after initiating
>> >>> a timed CQ using the ESC key.  However, if I am doing a timed CQ for
>> >>> 2-3 minutes or so, I cannot cancel the CQ using the ESC key. The
>> >>> quick way to stop the CQ is to toggle the focus to the other rig.
>> >>>
>> >>>
>> >>>
>> >>> I have two rigs connected but I was not operating SO2R.
>> >>>
>> >>>
>> >>>
>> >>> Issue with Bandmap has to do with what appears to be a WL slow
>> >>> response with the bandmap update anytime I am tuning up/down the
>> >>> bands.  Is there any way to improve(reduce)bandmap update response
>> >>> time?
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>> Any ideas?
>> >>>
>> >>>
>> >>>
>> >>> Thanks
>> >>>
>> >>>
>> >>>
>> >>> Mike
>> >>>
>> >>>
>> >>>
>> >>> _______________________________________________
>> >>> WriteLog mailing list
>> >>> WriteLog@contesting.com
>> >>> http://lists.contesting.com/mailman/listinfo/writelog
>> >>> WriteLog on the web:  http://www.writelog.com/
>> >>>
>> >> _______________________________________________
>> >> WriteLog mailing list
>> >> WriteLog@contesting.com
>> >> http://lists.contesting.com/mailman/listinfo/writelog
>> >> WriteLog on the web:  http://www.writelog.com/
>> >
>> > _______________________________________________
>> > WriteLog mailing list
>> > WriteLog@contesting.com
>> > http://lists.contesting.com/mailman/listinfo/writelog
>> > WriteLog on the web:  http://www.writelog.com/
>> >
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>