I'm beginning to setup my software to operate as a W1AW/KL7 station next
June. I'm going to be running WriteLog as my logging software using the
DXpediton module. This will serve me well for CW, RTTY and SSB. However, I
would also like to be configured to do PSK from WriteLog should that mode be
needing an operator. I have never run PSK from WriteLog before so am
looking for some help in getting Router setup for my MK II to be able to run
PSK.
I just configured the Mode in the Rttyrite window to be PSK instead of CW.
Right now the Port is set to None. When I set my IC-7600 to USB-D1 and try
to send WL transmits a DVK audio wave file instead of the macro messages in
the CW buffers, which is where I would expect WL to look for PSK macro
strings. So what do I need to change configuration wise? Do I need to
create a virtual port in router and assign that port in Rttyrite? Do I need
to change a setting in one of the DATA MODS in the IC-7600? If so, what
should I use, MIC, ACC, MIC/ACC, or USB [B]? I've checked the WriteLog
Setup Help file for the MK II, but it makes no mention of the PSK mode. Any
ideas most welcome!
73,
Gary AL9A
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|