Before running WriteLog did you run "Sound board mixer control" to
set the audio outputs and inputs for RTTYrite, and the WriteLog DVK?
XMMT.ocx and 2-Tone override audio handling for RTTY only.
73,
... Joe, W4TV
On 4/19/2014 6:29 PM, John W. Tipka wrote:
Upgrade from WinXP to Win 7 32bit. WL placed in C:\Writelog.
K1EL Keyer - Virtual port COM2
Elecraft K3 w/ Microham router 8.4.6 w/WL_11.16G. Microham MicrokeyerII
WL configures correctly for FSK w/ XMMT.ocx/MMTTY/2Tone. Standalone
MMTTY is correctly configured.
A change from FSK RTTY w/clones to CW is unsuccessful.
Procedure used:
1) RTTYRITE 2Tone window is closed. RTTYRITE 'TU type' menu selected.
2) "Sound Board AFSK" selected. (XMMT.ocx is now unchecked)
3) RTTY Control Panel disappears.
4) Select RTTYRITE Mode menu, select "CW" (45 baud (60 WPM) Baudot now
unchecked)
5) Select RTTYRITE Port menu, select "None" (No change from RTTY setting)
6) CW-Rttyrite and the Writelog CW Receiver now open.
Pitch range of WL CW Receiver set in range of same pitch as K3.
Received WPM within range set in configuration.
CW_XMIT_FREQ=749
CW_MIN=25
CW_MAX=0
MinCwIndex=21
MaxCwindex=3
lowpitch_left=720
lowpitch_right=680
Channels=1
HOWEVER, no audio waveforms are displayed on Writelog CW Receiver. No
signals demodulated.
What have I forgotten to do? Any help is appreciated.
73 John W8UL
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|