I built an inexpensive keying interface for CW keying so use a separate COM
port for CW. Rigblaster advantage does the rest. This way I have Writelog ready
to work CW or RTTY without having to change anything. I minimize the RTTY
screen until I need it.
73
NJ0F
Sent from my iPhone
> On Jan 21, 2014, at 12:00 AM, "Gary AL9A" <al9a@mtaonline.net> wrote:
>
> Gilles,
>
> If I understand your question correctly there may be a solution - use
> multiple writelog.ini files.
>
> I have multiple .ini files setup for different mode configurations, I just
> give them a temporary name that makes them unique. So I have a
> writelogcw.ini, a writelogrtty.ini and a writelogssb.ini. When needed I
> merely rename the particular .ini file back to writelog.ini so the WL program
> will use the settings in that file.
>
> For example, if you are running WL in CW and see a RTTY spot you can shut
> down the WL CW module, rename writelog.ini to writelogcw.ini and then rename
> writelogrtty.ini to writelog.ini. Now your current ini file is configured
> for RTTY. Open another WL module and it will come up configured for RTTY
> using MMTTY, or 2Tone, or a combination of MMTTY and 2Tone in various clone
> windows if that is what you have setup in that .ini file. When done working
> the RTTY DX, merely reverse the process. Close the WL RTTY module, rename
> the various .ini files back to their former state, and restart the WL CW
> module.
>
> A bit cumbersome, but more efficient than reconfiguring all the port
> assignments, TU settings, etc. I hope this is what you have in mind.
>
> 73,
> Gary AL9A
>
> -----Original Message----- From: G
> Sent: January 20, 2014 7:37 PM
> To: WRITELOG goupe
> Subject: [WriteLog] MMTTY separate temporary from WRITELOG
>
> Sometime I browse on all HF bands for DX spots from web cluster sites.
>
> My writelog is configured fo CW and if needed rapidely I close WL temporary
> and open MMTTY.
>
>
>
> Can we configure MMTTY to have access temporary to com port setting,
> entering a com port, working on bands and when terminated removing those
> temp configurations & return to WL CW settings as it was ???
>
> Gilles VE2LX
>
> =======================
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|