Gary,
I mixed apples and oranges this morning. I was seeing the D in my
general qso log (which may well be the DXped module) and I was recalling
the situation as I was preparing my RU log last week.
As I have been using this same module for many years to log qsos each
month, I no longer know what module it is. I just make a new copy each
month, clear out last months contracts and log this months. The Cabrillo
option is grayed out in the log I am using for general qsos each month.
I understand the D ok and can live with it, I just didn't know what the
LOTW export was going to do with them since I would want LOTW to see them.
This was I do the same thing each day with the radios and software as I
do during a contest. I make enough pilot errors as it is.
Thanks for the info
Jerry, W6IHG
On 1/14/2014 8:35 PM, Gary AL9A wrote:
Jerry,
You don't mention which WL module you are using to log your W1AW/n
QSOs, but I suspect it isn't the DXpedition mode module. That module
has the Cabrillo export option grayed out, as it isn't really intended
to be "contest" module, but more of a general logger. As a
consequence there is no ability to create a Cabrillo. Since you have
created a Cabrillo you must be using some other module, although I'm
perplexed as to why your Cabrillo export excluded the 'D' or dupe
entries. Duplicates do appear in the Cabrillo log, minus the 'D'
indicator, so that the scoring robot can get all the records and then
it will decide which ones are dupes or not. You may not have seen the
'D' flag on your dupes in the Cabrillo, but I bet if you go back and
look carefully at the file you will find that those records are indeed
there.
Keep in mind that WL is a contest logger and flagging dupes is in its
DNA. That's one of the main things it does. I am using the DXpedition
mode module to log my CW contacts with various stations working the
ARRL Centennial for points. I'm doing that because I am used to using
it in the CW mode and it is a much better logger for this purpose than
my general logger or even CW Type. (I've found CW Type to
problematic. When hand typing in a call, if I only get a partial and
send that partial back to get the fill on the missing character(s), CW
Type jumps the cursor out of the Call entry box to the main text
window for me to send more characters by hand typing. I don't want it
to do that, just leave the cursor in the Call box until I can get the
rest of the call filled info from the fill , but haven't found a way
to control that yet.) Other reasons for using the DXpedition mode
module is Rttyrite is a much better CW decoder than CW Get and it lets
you log the WARC bands which are normally not allowed in regular
contests. If you log a non-contest band in some other WL module you
will get a big red 'B' after the call telling you that you are "Out of
Band".
So, my suggestion is to use the DXpedition module for logging the
W1W/n stations. There will be lots of them on over the course of the
next year from various states using the same call, so just get used to
the 'D' indicator and ignore it. It doesn't matter! After I've logged
several calls for a given date I export them to an adi file and then
import them into my general logger. Then I upload that adi to TQSL
for LOTW and keep track of my QSLs, etc. in the general logger. Then
the next time I go back into the DXpedition module I just highlight
and delete all the log entries from my last use and start over with a
new clean log. Since I have the previous QSOs in my general logger
there is no need to keep them in the WL log any longer.
73,
Gary AL9A
-----Original Message----- From: Jerry Pixton
Sent: January 14, 2014 4:49 AM
To: writelog@contesting.com
Subject: [WriteLog] Duplicate qso in log
I am starting to work the w1aw/x stations.
I have qsos with w1aw/4 in NC and now when I logged a qso with w1aw/4 in
SC, Writelog marks the contact with a big D.
I noticed after the RU, when I got almost two hundred big Ds because of
my network mistake, that those contacts got dropped out of the Cabrillo
logs. Which is good but it bothers me as almost every contest I end up
with one or two qso where I log the station twice during the exchange
and usually the line with the D has the correct info.
So my question is: How do I get rid of the D? And when I export to the
LOTW format is that D qso going to disappear like it seems to for
Cabrillo export????? We are going to have lots of these stations with
the same calls but in different states this year.
Jerry, W6IHG
--
----------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner
jpixton@shentel.net
----------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|