Bud,
No idea why that is happening. Looks like you will have a fair amount of
editing the Cabrillo file after the contest to add in the missing QTCs.
73,
Gary AL9A
-----Original Message-----
From: Bud Trench
Sent: August 09, 2013 11:05 PM
To: writelog@contesting.com
Subject: [WriteLog] WAE - Dropping First QTC in block - Examples
Here are some examples of the problem from the QTC Report. Note that the
group number indicates 10 calls, but group only contains 9 calls. (The
first call that was transmitted is missing from the block).
0509Z 7015Khz DL1IAO 23/10
0341 LA2HFA 69
0342 HA1Q 63
0342 DK1FT 74
0342 DL4UCS 7
0344 DL8DWW 80
0344 DL8WX 47
0344 IR2C 277
0345 S57DX 170
0345 DK1AX 8
0512Z 7015Khz G3RSD 24/10
0346 OK1FCA 5
0346 LY7M 5
0347 HA3OU 46
0347 I3VJW 149
0347 F8AEE 64
0348 PA2EVR 6
0348 SN6A 13
0348 UR5EPG 3
0349 DM5D 76
-----Original Message-----
From: Bud Trench [mailto:aa3b.bud@gmail.com]
Sent: Saturday, August 10, 2013 12:51 AM
To: 'writelog@contesting.com'
Subject: WAE - Dropping First QTC in block
I am working WAE CW using Version 11.12. I am seeing a frequent but
intermittent problem when sending QTC's. I transmit a block of 10 which all
appear to go. The Tx-QTC column shows 10, but the QTC counter in the score
box only increases by 9. I also note that only the QTC-1 through QTC-9
fields contain data - the first QTC in the block is missing. Further, I
generated a Cabrillo file and note that it is also missing the first QTC.
I dropped back to Version 11.06 and see the same issue.
Any help? This is going to be a mess to sort out after the contest.
73 Bud AA3B
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|