WriteLog
[Top] [All Lists]

Re: [WriteLog] 11.11C & XMMT

To: <writelog@contesting.com>
Subject: Re: [WriteLog] 11.11C & XMMT
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
Date: Sun, 21 Apr 2013 11:24:22 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
This was specifically put in 11.11c by Wayne. It wasn't in 11.11b beta so I 
haven't checked it yet. Glad it's working.

73, Don AA5AU

-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Jerry 
Pixton
Sent: Sunday, April 21, 2013 10:59 AM
To: writelog@contesting.com
Subject: Re: [WriteLog] 11.11C & XMMT

Not to belabor the point, but I noticed immediately upon using 11.11 that the 
text was now paced like normally expected when using
mmtty.

Just to be fair, I just switched to 2Tone as primary and the text is still 
paced nicely with the print, audio and PTT.

Interesting.

Jerry, W6IHG

On 4/21/2013 5:19 AM, Ed Muns wrote:
> Unfortunately this is the way it works now.  I am disappointed because 
> I have previously depended on the transmission printing to be closed 
> sync'd with the actual transmission.  I have used that information to 
> time my transmissions on other radios.  MMTTY with the MMTTY Plug-in 
> had exellent correlation between printed transmitted characters (blue 
> Italic text in the Rttyrite window) and the actually transmitted characters.
>
> However, I've come to learn that some other ops pay no attention to 
> the transmission printing and instead rely on the monitor audio to 
> tell them when the transmission is finished.  Nonetheless, I have made 
> the request for this to be fixed in WriteLog but I don't know how feasible 
> that is.
>
> Ed W0YK
>
> Anthony N2KI wrote:
>> I did my upgrade to v 11.11C and followed the procedure outlined on 
>> Don's page.  Initially I had trouble when starting WL and traced it 
>> to a bad comm port number in the ini file.  Once this was fixed  and 
>> I tested WL using XMMT and found there to be a timing problem with 
>> what is being sent in relation to how it appears on the transmit 
>> window in Rittyrite.  The transmit window prints what is being 
>> transmitted but the actual transmission is still ongoing well after 
>> the TX window displays what is being transmitted.
>> Anyone else seeing this?  Is there a fix?  Thanks
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/ .
>

--
-----------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner/
jpixton@shentel.net
-----------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>