Now with writelog v11.11 fixing the AFC issue, I am ready to make 2Tone
the primary rttyrite TU and move mmtty to the clone window. But...
This is Windows 7 64 bit. I have my Flex 5000 with both receivers, the
microHAM SO2R+ box, Writelog running the K3 rig driver for SO2V and
right now mmtty is in use as the primary rttyrite TU with 2Tone as the
clone and a little relay control software for my two amps. It all works
amazingly well. For the first time in over the year I have owned the
Flex 5000 it is all playing like real radios used to.
But the issue is that I need to set one PTT serial port for one radio to
use. I have always done this in mmtty where I can have PTT and still use
AFSK when needed.
When I make 2Tone the primary TU for the rttyrite there seems to be no
way to key a PTT serial port when I have to use AFSK. As soon as I try
to use a rttyrite port, FSK is assumed.
Am I in never never land? I definitely see the difference in 2Tone
decode. But I am not seeing a way to make it the primary TU when a PTT
relay is needed to route the PTT back to the Flex.
Maybe I will just move the clone window up top in place of the mmtty
window since I can click in either window anyway.
Any ideas???
Jerry, W6IHG
--
-----------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner/
jpixton@shentel.net
-----------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|