What interface are you using for the second radio? DigiKeyer II
handles one rig ... presumably the MK V. 2nd CAT port in Router
provides an opportunity for a second program to "snoop" on data to
the rig connected to DK II.
You will need a CAT connection and port in WriteLog's Ports dialog
for the TS-870.
73,
... Joe, W4TV
On 4/17/2013 6:52 PM, rob wrote:
Hi All
Ok I know I missed it somewhere, and yes I have read the
Docs on Digi keyer and writelog.......I am trying to get writelog
to communicate with my ts870 and ft1000 mark 5.
I can get writelog to read the ft1000 frequency fine. I have
selected two radios from writelog. I can not get it to read second
radio's frequency. I also have a software program
Comm Cat it WILL read both frequencies at the click of a button.
I use port 2 for ft1000 and port 3 for ts870.
In Digikey 2 Main cat port is 2 .....Nothing seems to work for
2nd Cat. Not sure if I should do anything there. A couple years
back I had writelog setup for 2 radios, but then I did not use
Digi Keyer 2.
Can anyone get pointed in right direction to check out ?
73 BoB WA1FCN
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|