This morning a friend brought over his SignaLink USB for me to try.
There was no difference. So I was starting to think that maybe I had a
radio problem with my FT-950.
I contacted Tigertronics Tech Support and spoke to a tech support
guy named Jason. After trying several thing he had me look at the menu
settings in my FT-950.
We pinpointed Menu #50 as the possible culprit, being it was set too
low, So, we changed the setting to the default (50) and tried a RTTY
transmission. Voila! That did it. I am back to full output again, and
have
tested it with a couple local friends.
I want to thank all the people who were kind enough to offer suggestions as
to what the problem might be. If that ever happens with your FT-950 and
SignaLink Interface, take a look at Menu #50.
Thanks again folks. Appreciate all the help.
73,
Dick
W0RAA
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|