Now, when open the "TU type" and check "XMMT.ocx", one of the two 2
Tone windows closes and then reopens on top of the other 2 Tone
window. Do not get the "Setup XMMT.ocx" window. So what did I delete
that I shouldn't have or is there something else needs to be done?
*Every* instance of MMTTY and 2Tone must be in its own directory and
each RTTYrite Window (Radio 1, Radio 2, Clone, etc.) must refer to
a different directory.
The [RTTYrite], [RTTYrite2], [Rttyrite=Clone#], and [Rttyrite2-Clone#]
sections contain location and size information for the RTTYrite windows.
*HOWEVER* the location for the MMTTY and 2Tone tuning displays/control
panels is stored in the ini file *in each MMTTY/2Tone directory*.
If you try to run multiple MMTTY or 2Tone instances from the same
directory *they will open on top of each other*.
You want to create *at least* two MMTTY directories and two 2Tone
directories - that will allow a combination of four decoders - Main
and Sub Rx or Radio 1 and Radio 2 each with one Clone window. If
you need more Rttyrite windows, you must create more directories for
MMTTY and/or 2Tone.
*DO NOT* try to share the same MMTTY directory between the old plug-in
and the new XMMT.ocx interface. IMO, the old plug-in should be
uninstalled - it is too limited and unreliable compared to XMMT.ocx
when XMMT.ocx is properly configured.
73,
... Joe, W4TV
On 4/2/2013 9:47 PM, Mike wrote:
Hello,
Got 2 Tone working in a single computer SO2R setup (MS XP) after deleting
the MMTTY from Writelog.ini, "RttyRite", "CustomTnc1MenuEntry=" and
CustomTnc1Progld=". "MMTTY_LOCATION=C\Program Files\2Tone\2Tone.exe" is
now in the Writelog.ini. Unfortunately, can't get to MMTTY using XMMT.ocx
via WL, Rttyrite window TU type and clicking on XMMT.ocx.
Now, when open the "TU type" and check "XMMT.ocx", one of the two 2 Tone
windows closes and then reopens on top of the other 2 Tone window. Do not
get the "Setup XMMT.ocx" window. So what did I delete that I shouldn't
have or is there something else needs to be done? One possibility would be
to change the "MMTTY_LOCATION=...." to the location of the MMTTY.exe file.
However, thought one could switch back to MMTTY by opening up the "Setup
XMMT.ocx" window and selecting the path to to MMTTY.exe. Is my thinking
skewed regarding how to change TU type via the XMMT.ocx>Setup XMMT.ocx
window?
73,
Mike, K4GMH
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|