> The setup here is IC-706MK2G - DIGI KEYER II and WriteLog V. 11.04A.
See the example configuration for Writelog and Digikeyer II available
via "Help | Download Documents" in microHAM Router or online from the
Digikeyer II area at www.microHAM-USA.com/Support.html.
73,
... Joe, W4TV
On 6/14/2012 4:50 AM, Gerd Uhlig, DL7VOG wrote:
> First of all thank you for your hints. CW works fine now but there are
> still a few problems waiting to be solved.
>
> The setup here is IC-706MK2G - DIGI KEYER II and WriteLog V. 11.04A.
>
> The main problem at the moment is that WriteLog doesn't overtake the
> frequency from the transceiver, though DIGI Keyer changes QRG when the
> rigs tuning know is turned.
> When I open WriteLog the setup window of Digi Keyer still shows the
> right frequency but the red arrows at COM4 and WinKey (COM3) are
> blinking about once per second and after about 8 seconds the displayed
> frequency and mode above COM4 is greyed out for about 1 second and so
> on. When I close Writelog all is okay in the Digi Keyer setup.
>
> The left button beside the entry window in WriteLog shows < kHz CW> and
> when I open it the window shows nothing in the frequency window in the
> upper right position.
> Log the frequency of QSOs is set to <rig on COMM4>.
> All (rig, digi keyer and WriteLog) is set to 4800 bps.
> The second problem is RTTY - reception is okay but I can't transmit at
> all - but this is for a later solution.
>
> Does anybody have any suggestion to solve the problem?
>
> 73 de Gerd / DL7VOG
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|