Hi Karl,
I don't think that the problem comes from the " 2 stop bits". I just tried
my Ic-7000 with WL and it works just fine with 2 stop bits . I Tried " 1
stop" bit with another program (Logger32) and everything is ok.
The Hex address must be the default one (70). You must check it in the
IC-7000.
Check also the baud speed in WL. It must be the same on the Radio, don't
use the "Auto" on the port setting. My setting is 19200.
I hope that this will help.
Best 73's, Mohamed, CN8KD.
On Wed, Mar 7, 2012 at 8:59 PM, Karl Kaukis <karl@kaukis.com> wrote:
> Trying to configure CAT for IC7000 and WL. CAT works fine with most other
> programs. WL does not see the 7000. WL opens cat port as 2 stop bits
> instead of 1 as is correct and as other programs do. Is that the problem?
> What do I do?
>
> --
> Karl Kaukis
> 6714 E. 19th Ave.
> Stillwater, OK USA 74074
> Phone: 405-334-1511
> FAX: 877-334-1511
> Skype: karl.kaukis
> karl@kaukis.com
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|