Per my earlier message, when I changed COM ports in the clone window
everything seemed to work ok, but I haven't actually copied signals over the
air yet. I did not experience your problem with MMTTY.ini not updating.
But then I didn't start a second instance of MMTTY from a different location
and I closed the second MMTTY window and clone RittyRite window before
shutting down WL. Maybe that's the difference?
73,
Gary AL9A
----- Original Message -----
From: "Dick Flanagan" <dick@k7vc.com>
To: "Gary AL9A" <al9a@mtaonline.net>; "WriteLog" <writelog@contesting.com>
Sent: January 05, 2012 10:06 PM
Subject: Re: [WriteLog] WL/MMTTY Problem
> In the clone window, select the TU Type drop-down and then select MMTTY.
> A new MMTTY control panel should open, but it is tricky as it will exactly
> overlay the current MMTTY control panel. You will need to select it and
> move it out of the way.
>
> You should then be able to select a different profile for each MMTTY
> control panel.
>
> My problem was after I did that and then closed Writelog, I received an
> error that MMTTY.INI could not be updated. When I then re-opened
> Writelog, MMTTY could not communicate with the outside world. After again
> closing Writelog and then directly invoking MMTTY, I find that the FSK and
> Control ports have been reset to NONE.
>
> It acts like whatever caused the MMTTY.INI update error is causing the
> MMTTY FSK and control ports to be reset. Once that happens, you have to
> use MMTTY to configure them again.
>
> This works for Ed so I am assuming I have a configuration error. I will
> be curious to see how successful you are.
>
> Dick
>
> --
> Dick Flanagan K7VC
> dick@k7vc.com
>
>
> On 1/5/2012 10:44 PM, Gary AL9A wrote:
>> Ed,
>>
>> I can get the clone RittyRite window to open, but it didn't ask me for
>> the
>> path to MMTTY. Despite this it appears to be receiving and decoding.
>> But
>> per Dick's request how do you get another MMTTY window to function with
>> the
>> clone window so that you can choose a different Profile for the clone?
>>
>> 73,
>> Gary AL9A
>>
>>
>> ----- Original Message -----
>> From: "Ed Muns"<w0yk@msn.com>
>> To: "'Dick Flanagan'"<dick@k7vc.com>
>> Cc: "'WriteLog'"<writelog@contesting.com>
>> Sent: January 05, 2012 2:41 PM
>> Subject: Re: [WriteLog] WL/MMTTY Problem
>>
>>
>>> Ah, so, but you don't need two instances of MMTTY. You just "clone" the
>>> first Rttyrite window that has MMTTY as the TNC. In the Rttyrite File
>>> menu
>>> of the first Rttyrite/MMTTY window you bring up, click 'Clone' and when
>>> it
>>> asks you for the path to MMTTY, give it the path to the first instance
>>> of
>>> MMTTY. You can have any number of clones without resorting to
>>> additional
>>> instances of MMTTY.
>>>
>>> Ed - P49X (W0YK)
>>>
>>> Dick, K7YC, replied:
>>>> As per your NCCC presentation, I am looking for the opportunity to have
>>>> two different profiles processing the same audio stream.
>>>>
>>>> Dick
>>>>
>>>> --
>>>> Dick Flanagan K7VC
>>>> dick@k7vc.com
>>>>
>>>>
>>>> On 1/5/2012 3:20 PM, Ed Muns wrote:
>>>>> I've had this happen once in a while, but not often, and not recently.
>>>> I've
>>>>> never worried about it or looked into it. But, I am curious about
>>>>> what
>>>> is
>>>>> going on.
>>>>>
>>>>> Why are you using two instances of MMTTY?
>>>>>
>>>>> Ed - P49X (W0YK)
>>>>>
>>>>> Dick, K7VC, wrote:
>>>>>> During today's RTTY RU practice, I noticed a problem running two
>>>>>> instances of MMTTY. When exiting WL I received an error message that
>>>>>> MMTTY.INI cannot be updated. When I again invoke MMTTY, all port
>>>>>> settings have been set to NONE.
>>>>>>
>>>>>> Why is WL trying to update MMTTY.INI? What kind of circumstance
>>>>>> would
>>>>>> cause this kind of error? WRITELOG.INI has the correct path to the
>>>>>> MMTTY directory and MMTTY operates properly until I exit WL at which
>>>>>> point the MMTTY ports are set to NONE and I need to reset them.
>>>>>>
>>>>>> Could the two instances of MMTTY be fighting over some resource?
>>>>>> Could
>>>>>> one instance be trying to update MMTTY.INI while the other instance
>>>>>> has
>>>>>> it open? Has anyone else experienced difficulties running two
>>>> instances
>>>>>> of MMTTY from within WL?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web: http://www.writelog.com/
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>>
>>
>>
>>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|