So is it working now?
73,
Gary AL9A
----- Original Message -----
From: "Chuck" <w5pr@swbell.net>
To: <writelog@contesting.com>
Sent: December 08, 2011 5:45 PM
Subject: Re: [WriteLog] RigExpert TI-5 Audio Setup Problem
withIC-756ProIIIWindows Vista Home Premium
> Vista Home Premium. "Setup/Ports/DVK type" is set to Windows. VOX is on.
>
> Thanks!
>
> Chuck
>
>> sound board
> ----- Original Message -----
> From: "Gary AL9A" <al9a@mtaonline.net>
> To: "Chuck" <w5pr@swbell.net>; <writelog@contesting.com>
> Sent: Thursday, December 08, 2011 8:12 PM
> Subject: Re: [WriteLog] RigExpert TI-5 Audio Setup Problem with
> IC-756ProIIIWindows Vista Home Premium
>
>
>> Chuck,
>>
>> What is your OS? Vista and Win 7 handle audio management differently
>> than
>> earlier versions of Windows. I'm not familiar with the RigExpert, but
>> offer the following.
>>
>> If you have the WriteLog Sound Mixer Level Control (sound manager?) set
>> to
>> USB Audio CODEC, make sure you have "Setup/Ports/DVK type" set to
>> Windows
>> sound board. You must have some method of engaging PTT on the mike, a
>> foot switch, the radio's VOX, or a WriteLog function key set to play back
>> a prerecorded <magn.wav> file through the DVK.
>>
>> 73,
>> Gary AL9A
>>
>>
>> ----- Original Message -----
>> From: "Chuck" <w5pr@swbell.net>
>> To: <writelog@contesting.com>
>> Sent: December 08, 2011 4:04 PM
>> Subject: [WriteLog] RigExpert TI-5 Audio Setup Problem with
>> IC-756ProIIIWindows Vista Home Premium
>>
>>
>>>I just got the RigExpert TI-5 and can't figure out how to get audio
>>>through it from the mic plugged into the back of the TI-5 to the rig. CW
>>>and CAT functions are ok. It will record off the air. The instructions
>>>say: "In the sound card software, select the USB Audio Codec sound card."
>>>When I go into Control Panel, Hardware and Sound, Sound I have a record
>>>and playback buttons which both show USB Audio CODEC working. I have set
>>>the Writelog sound manager to USB Codec. I get no audio from the mic to
>>>the rig. I am hoping to make this work with Writelog as a DVK. What am I
>>>missing? I don't have to use the foot switch, do I?
>>>
>>> Thanks!
>>>
>>> Chuck W5PR
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web: http://www.writelog.com/
>>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|