What interface are you using? Do you have RTS/CTS properly connected
and configured? Kenwood transceivers require handshake (or "fake
handshake" if you are using the radio port for CW).
Read the WriteLog help files regarding RTS and DTR settings for
WriteLog.ini.
73,
... Joe, W4TV
On 11/18/2011 7:21 PM, Tom Shelton wrote:
> So far, nothing I've tried has worked. I'm pretty tech savvy and I really
> believe the problem is with the software.
>
> I had high hopes for putting this program on the air for sweepstakes. I
> really want to like it, and I'm sure I will when it works for me.
>
> Downloaded N1MM for the weekend's contest support.
>
> -----Original Message-----
> From: Tom Shelton
> Sent: Thursday, November 17, 2011 5:11 AM
> To: writelog@contesting.com
> Subject: Re: [WriteLog] No Rig! problem (TS-2000)
>
> I made sure the settings were correct in the entry window.
>
> A few other things I’ve tried:
>
> Changing the data rates – no joy.
> Changing the line in the setup window – no joy.
> Swapping the location with the working IC-7200 – no joy.
> I’ve done several full reloads of writelog – no joy.
>
> Getting frustrated . . .
>
> Tom, AB3IC
>
> From: Jim Rhodes
> Sent: Thursday, November 17, 2011 1:41 AM
> To: Tom Shelton
> Cc: writelog@contesting.com
> Subject: Re: [WriteLog] No Rig! problem
>
> You did set the frequency in that entry window to "rig on com 4" didn't you?
>
> Jim K0XU Sent from my Xoom tablet
>
> On Nov 16, 2011 6:52 PM, "Tom Shelton"<gl1800winger@verizon.net> wrote:
>
> I last wrote to you about a few problems I was having. A couple of them I
> figured out, but one is still a mystery to me.
>
> I have a Kenwood TS-2000 using port 4 (9600, N, 8, 1). I’m using a
> USB/Serial adapter here. In the entry window, the rig is showing as No Rig!
> instead of the frequency and mode. I also have an IC-7200 using port 5 (same
> as above). This rig shows up properly in the in the entry window.
>
> I’ve verified both configs in the writelog.ini file.
>
> Both radios work well with Ham Radio Deluxe.
>
> I’d like to use the TS-2000 for the Sweepstakes this weekend, so having
> the frequency is necessary for the log. Please help soon...
>
> Tom Shelton, AB3IC
>
> No electrons were harmed in the sending of this message, although several
> were terribly inconvenienced.
> Draco Dormiens Nunquam Titillandus
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|