Hi Bud,
The original version failed when we started using all the bands. I fixed it
several weeks ago and published the update with a note to the reflector. The
updated version is also available on the CWOps website.
73,
Pat KØPC
----- Original Message -----
From: <writelog-request@contesting.com>
To: <writelog@contesting.com>
Sent: Saturday, November 12, 2011 2:00 PM
Subject: WriteLog Digest, Vol 107, Issue 10
> Send WriteLog mailing list submissions to
> writelog@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/writelog
> or, via email, send a message with subject or body 'help' to
> writelog-request@contesting.com
>
> You can reach the person managing the list at
> writelog-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of WriteLog digest..."
>
>
> Today's Topics:
>
> 1. Speed changes are lost when %I insertion variable is used in
> messages (Mike Heideman)
> 2. K0PC CWOps Mini-CWT Version 1.0 is Flawed (Bud Trench)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 12 Nov 2011 00:57:48 +0000
> From: Mike Heideman <mike_heideman@hotmail.com>
> Subject: [WriteLog] Speed changes are lost when %I insertion variable
> is used in messages
> To: <writelog@contesting.com>
> Message-ID: <SNT105-W58507C662C64121456BA829DC20@phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
> We want to set up a QSY message that enables us to move stations to our
> mult radio in CQWW CW. Since the mult radio is most likely tuned to a
> mult's frequency it doesn't make sense to use the %Z variable in the
> message. Instead we opted to use %I and plan to quickly type in a
> frequency near the top of the band.
>
> Instead of sending the QSY message at the normal run speed we want to slow
> it down to catch the attention of the operator that we're trying to move.
> This also gives us a little more time to type in the frequency. Here is a
> sample message that we tested, slowed down a lot so that we could easily
> tell the difference in speed.
>
> OK
> >>>>>PSE QSY %I<<<<<
>
> This message sends OK at normal run speed, then sends PSE QSY much slower.
> It then returns to the normal run speed to send the frequency that was
> typed in. Is there a way to send the inserted keystrokes at the modified
> speed instead of returning to the original speed setting? If not this
> would be a useful enhancement for situations such as the one described.
>
> Our keying was done with a WinKeyer2.
>
> -Mike, N7MH
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 12 Nov 2011 13:31:16 -0500
> From: "Bud Trench" <aa3b.bud@gmail.com>
> Subject: [WriteLog] K0PC CWOps Mini-CWT Version 1.0 is Flawed
> To: <writelog@contesting.com>
> Message-ID: <75F6B4C1F8AC4925B559910E5CA08A70@LAPTRENCH>
> Content-Type: text/plain; charset="us-ascii"
>
> I experienced software crashes using Writelog Version 10.90A and the K0PC
> CWOps Mini-CWT version 1.0. After the CWOps Mini-CWT at 1300z, I saw a
> note
> that K0PC CWOps Mini-CWT version 1.0 is flawed. An update is available
> at:
>
> http://www.w0aa.org/tmp/Mini_CWT_1.1.msi
>
> The update appears to work fine.
>
> 73 Bud AA3B
>
>
>
> ------------------------------
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
> End of WriteLog Digest, Vol 107, Issue 10
> *****************************************
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|